automatic powder coating line for standard works
Flexible and efficient powder coating system.
Process Flow: Loading– Pre-Treatment –Drying–Automatic Powder Coating –Curing –Cooling –Unloading
1. Workpiece Name: lamp post
2. Maximum Size: L2200*W500*H1200 (Mm)
3. Area Size: 57m*30m
4. Heating Method: Natural Gas
5. Conveying Specifications: Qxg250 Type
6. Conveying Length: 340 Meters
Design and features
1. This line is a typical standard product coating line. It is generally used in situations where the products are relatively standard, the product size is not too large and the output requirements are high.
2. This line uses the QXG250 standard chain as the main body of the workpiece conveying system, which is characterized by low cost, durability, and low failure rate.
3. The layout of the entire line adopts the layout principle of wet and dry zones. The wet zone spraying part is arranged on the side of the workshop wall, and the dry zone coating part is arranged outside near the loading and unloading zone to facilitate centralized management. A bridge-type drying oven is arranged in the middle, which effectively isolates the mutual interference between the painting part and the coating part.
4. The spraying part uses two sets of spraying systems. A set of PP big cyclone magic color changing system is used to spray the main products, and a set of manual spraying system for proofing is used to spray a very small amount of parts of other colors, which can make the whole line more flexible.
5. The spray gun adopts Debelle spray gun, which has high powder loading efficiency, fast spraying speed, and good durability.
- All Types Of Equipment For Powder Coating Lines
- Any Size According To Customer's Requirements
- Production Within 45-90 Days
- Delivery And Professional Installation
- 24 Months Warranty And Lifetime Service
Proven
30 years of experience providing proven equipment
Lifetime Service
Maintenance is more important than repair
Maximum Efficiency
Production line capacity fully matches demand without wasting any resources
Contact Us -- Free Design & Order Equipment Calculation
Order Equipment Calculation
In Order To Provide You With The Best Solution, Please Tell Us The Following Information
● Factory Dimensions (length, width, height)
● Work Piece Output (1 day = 8 hours, 1 month = 30 days)
● Material of the workpieces
● Dimensions of work piece
● Weight of the workpieces
● Color Change Demand (Frequency)
We closely communicate with clients to understand their needs and provide tailored solutions. Once the solution fits their requirements, we customize the production of the powder coating line to help them adapt to their specific production environment and coating needs.
/CONTACT US
Want to Discuss Your Upcoming Product Line?
Hinah coating will help you get things done.
Email us
Tel (Whatsapp/Wechat)
+86-186 3213 8668
Learn How We Helped 1000+ Customers Gain Success.
